Vista VIP Kit2 VK2-ENCODER Bedienungsanleitung

VK2-VGAVFD User Manual

10 Use the following drawings to install the camera module to the housing.

11 • Base Installation Make mounting holes and cable hole in the place (ceiling) to which this dome. Camera is installed using the Template she

12 Use the template provided to mark location holes, use mounting screws and plugs suitable for the surface that t

13 • Using the Quick install Adaptor (option) Use the optional Quick install Adaptor on wall or ceiling application 1. Install the Adaptor in

14 2.2 Connection • Connecting to the RJ-45 Connect a standard RJ-45 cable to the network port of the network dome camera. Generally a cr

15 2.3 Network Connection and IP assignment The VK2-VGAVFD supports the operation through the network. When a camera is first connected to the netwo

16 3. Operation The VK2-VGAVFD can be used with Windows operating system and browsers. The recommended browsers are Internet Explorer, Safari, Firef

17 3.2. Access from the internet Access from the internet once connected, the VK2-VGAVFD is accessible on your local network (LAN). To access the

18 To set the password via a standard HTTP connection, enter it directly in the first dialog shown below. To set the password via an encrypted HTTPS

19 3.4 Live View Page The live view page comes in eight screen modes like 640x480, 320x240, and 160x120. Users are allowed to select the most suita

2

20 2) Control toolbar The live viewer toolbar is available in the web browser page only. It displays the following buttons: The Stop button stops

21 3.5 Camera setup menu This section describes how to configure the VK2-VGAVFD, and is intended for product Administrators, who have unrestricted a

22 3.5.1 Basic Configuration 1) Users User access control is enabled by default. An administrator can set up other users, by giving these user name

23 2) Network The VK2-VGAVFD support both IP version 4 and IP version 6. Both versions may be enabled simultaneously, and at least one version must

24 2. The ARP/Ping service is automatically disabled two minutes after the unit is started, or as soon as an IP address is set. 3. Pinging

25 * MPEG4 SP(Simple Profile): Mostly aimed for use in situations where low bit rate and low resolution are mandated by other conditions of the

26 • Image Setting Sometimes the image size is large due to low light or complex scenery. Adjusting the frame rate and quality helps to control t

27 • New Server Time Select your time zone from the drop-down list. If you want the server clock to automatically adjust for daylight savings tim

28  Appearance • Image Appearance This page provides access to the advanced image settings for the VK2-VG

29  AE & AWB This page provides access to set the exposure and white balance of the VK2-VGAVFD. • Ex

3 WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE P

30 • White Balance Control This adjusts the relative amount of red, green and blue primary colors in the image so that the neutral colors

31 The privacy masks are configured by Mask windows. Each window can be selected by clicking with the mouse. It is also possible to resize or delet

32 Note: To use webcasting service, the Enable Anonymous viewer login option must be checked. Refer to “3.6.1 Basic Configuration > Users” for mor

33  Alarm In Select “Enable” to activate the alarm event. The VK2-VGAVFD support 1 alarm input ports. - Type: Choos

34  Manual Trigger This option makes use of the manual trigger button provided on the live view page, which are used to

35  Motion Motion detection is used to generate an alarm whenever movement occurs (or stops) in the video image. A

36 To create a motion or mask window, follow steps: 1. Click the right button of mouse to see the mouse menu. 2. Select New Motion (or Mask

37 2) Event-Out  SMTP(E-Mail) The VK2-VGAVFD can be configured to send event and error email messages via SMTP (S

38 - User Name/Password: Enter the User Name and Password as provided by your network administrator or ISP (Internet Service Provider). To

39 initiates both the FTP control and data connections to the target server. This is normally desirable if there is a f irewall between the camera an

4 Important Safeguard 1. Read Instructions All the safety and operating instructions should be read before the appliance is operated. 2. Retai

40 • HTTP Server Setting - Name: The name of the HTTP event server. Use a descriptive name. - URL: The network address to the server and

41 Record When the VK2-VGAVFD detects an event, it can record video stream in the Micro SD Memory. Check the box to enabl

42 3) Event Map The event map allows you to change the settings and establish a schedule for each event trigger from the VK

43 • General Enter the name for a new event map. • Event In Select an event type in the drop down list. • Event Out - E-mail:

44 • Location Configuration Enter the location information. You can enter that by four. 2) Security  Users User ac

45  HTTPS For greater security, the VK2-VGAVFD can be configured to use HTTPS (Hypertext Transfer Protocol over SSL (Secu

46  IP Filtering Checking the Enable IP address filtering box enables the IP address filtering function. Up to 256 IP add

47 3) Date & Time • Current Server Time It displays the current date and time (24h clock). The time can be displa

48 4) Network Setting in regard to network can be executed. Settings for IP, DNS, Host Name, Port, and ARP/Ping

49  Basic • IP Address Configuration: - Obtain IP address via DHCP: Dynamic Host Configuration Protocol (DHCP) is a protocol that lets n

5 Contents Contents ...

50  DDNS • Internet DDNS(Dynamic Domain Name Service) When using the high-speed Internet with the telephone or cable ne

51  RTP Have a setting for sending and receiving an audio or video on a real-time basis. These settings are the IP address

52  UPnP The VK2-VGAVFD includes support for UPnP™. UPnP™ is enabled by default, and the VK2-VGAVFD then is automatically de

53  QoS Quality of Service (QoS) provides the means to guarantee a certain level of a specified resource to selected traffic on a network. Quality c

54 • Auto Traffic Control Set a limitation on user network resources by designating the maximum bandwidth. - Maximum bandwidth - In case of

55 • NAT traversal Settings - Enable - when enabled, the network transmitters attempt to configure port mapping in a

56 6) Maintenance • Maintenance Server - Restart: The unit is restarted without changing any of the settings. U

57 Import and apply a setting value saved to a user PC. Note: Backup and Restore can only be used on the same unit running the same firmware. This

58 3.6 Playback from SD Card The Playback window contains a list of recordings made to the memory card. It shows each recording's start time,

59 Fast forward play: play fast forward of the video clip. Step forward play: go forward one frame of the video clip. Clip copy: copy

6 1. Description This manual applies to the VIP Kit2 Camera – VK2-VGAVFD. The VK2-VGAVFD camera is a IP VK2-VGAVFD. The VK2-VGAVFD comes suppli

60 3.7 Help The Help information window will be provided as a popup window so that users can open and read it without a need for log-in. It will off

61 3.8 Resetting to the factory default settings To reset the VK2-VGAVFD to the original factory settings, go to the Setup>System> Maintenanc

62 4. Appendix 4.1 Troubleshooting Troubleshooting if problems occur, verify the installation of the VK2-VGAVFD with the instructions in this manu

63 4.2 Preventive Maintenance Preventive maintenance allows detection and correction of minor that faults before they become serious and cause equi

64 4.3 Product Specification Main Item Specification C A M E R A Image sensor 1/4” Progressive scan RGB VGA CMOS Active Array 640(H) x 480(V) Lens V

65 System Requirement for Web Browser Operating System: Microsoft Windows 98, Microsoft Windows ME, Microsoft Windows 2000, Microsoft Windows XP,

66

67

68 Norbain SD Ltd 210 Wharfedale Road IQ Winnersh Wokingham Berkshire England RG41 5TP Subject to change without notice 0118 91

7 1.2 Key Features • Excellent video quality The VK2-VGAVFD offers the highly efficient H.264 video compression, which drastically reduces ba

8 2. Installation For the operation of the VK2-VGAVFD, it is necessary to connect a network cable for data transmission, power connection from sup

9 1 Micro SD Slot Micro SD slot for local recording located inside housing 2 Alarm IO Terminal AI: Alarm Input, G: Ground, AO: Alarm Output • Ex